We specialize in Current Sensors, CT Sensors, and Measuring Instruments.

AC/DC Clamp Meter/Leakage Clamp Meter

M-700 AC/DC Clamp Milliammeter (CE)5mmφCT, AC/DC leakage current

AC/DC Leakage Current Measurements (CE)


High sensitive for low range leakage current.
Suitable for measurement of 4-20mA DC controlled circuit.
DC mV analog signal output.
Lowest influence from Magnetization and Terrestrial magnetism.
Wide measuring ranges up to DC 1000mA and AC 10A.
Withstanding Voltage AC 3700V/1 minute between CT and outer case
Storage Temperature -10~60℃, < 70%RH (without condensation)
Accuracy DC Current
(Accuracy:23℃±5℃, less than 85%RH)
Range/Measuring Range/Resolution/Accuracy

Influence of terrestrial magnetism : Less than ±0.5mA
Influence of magnetization : Less than ±0.5mA by DC 1.5A on/off
Influence of CT opening and closing : Less than ±0.7mA
Max. input current : DC 1.5A

AC Current
(Accuracy:23℃±5℃, less than 85%RH)
Range/Measuring Range/Resolution/Accuracy
Max. input current : AC 20A
Operating Temperature 0~50℃, < 85%RH (without condensation)
Power supply LR6, AM-3 or AA size battery×4
Dimension Main unit:78(W)×155(H)×32(D)mm, Approx. 280g 19(W)×133(H)×28(D)mm
CT (CTP-05DC):1.2m lead, Approx. 100g
AC Conversion Average sensing rms reading
CT type Slide/Hook type
Safety standard IEC 61010-1, IEC61010-2-032
CATⅡ 600V or CATⅢ 300V
Jaw opening capability 5mmφ
Limitation of circuit voltage Less than AC/DC 600V
Accessories Carrying case, Batteries, Instruction manual
Current Consumption Approx. 9mA (Approx. 200 hours continuous use)
Option Cable for recorder
Sampling rate 1 time/sec. for DC and 6 times/sec. for AC
Display Max. 2000 count on LCD with annunciators
Measuring function AC/DC leakage current
Measuring ranges DC 100mA/1000mA, AC 100mA/1000mA/10A (45Hz~65Hz)
A/D Conversion Dual slope integration method
Over range indication "OL" mark on LCD
Data hold indication "DH" mark on LCD
Low battery indication "Battery" mark on LCD
Analog signal output DC 100mV full scale to each range
(Output impedance: less than 10kΩ)
Auto power off Approx. 10 minutes after last switch operation
(Auto power off function can be released by the switch)
Zero adjustment For DC current range by "0 ADJ" switch