We specialize in Current Sensors, CT Sensors, and Measuring Instruments.

HOME
back
AC Clamp Meter

M-2100+ Digital Clamp Tester (CE)55mmφCT, ACA, ACV, DCV, Ω

AC Current, 20A/200A/2000A, 55mmφ CT (CE)

FEATURES

Wide current measurements with tear drop type 55mmφCT up to 2000A.
Data-hold and Auto power off function.
Additional AC/DC voltage, resistance, diode test, continuity check.
Conform to IEC safety requirements.
DOWNLOAD

SPECIFICATIONS
Safety standardIEC 61010-1, IEC 61010-2-032 Installation CategoryⅡ600V or CategoryⅢ300V.
E.M.C. standardIEC 61326
Measuring methodDual slope integration mode
Display3.5 digit LCD, max. reading of 1999
Jaw opening capability55mmφ
Over range indicationBlanking of all digits except MSD 1
Low battery indication"Battery" mark on LCD
Data hold indication"DH" mark on LCD
Sampling2 times/sec
Withstanding voltageAC 3700V 1 minute max. (Between the core of CT and outer case)
Operating temperature0℃ to 40℃, 80%RH max. ( Without condensation )
Storage temperature-10℃ to 60℃, 70%RH max. ( Without condensation )
Power supply1.5V (AM-4, LR03 or AAA)×2
Power consumption3.5mW
Auto power offAutomatically turned off if the meter has not been used for approx. 10 minutes.
Battery lifeApprox. 500 hours continuous
Size85(W)×240(H)×34(D)mm
WeightApprox. 350g
AccessoriesHard carrying case
Instruction manual
Test lead
Batteries
Accuracy
Function Range Accuracy Maximum input
AC A (50/60Hz)
Manual ranging
20A ±1.2% rdg ±10 dgt AC2000A
(within 3 second)
200A ±1.2% rdg ±10dgt
2000A ±1.2% rdg ± 8 dgt
AC V (50/60Hz)
DC V
Auto ranging
2V ±0.7% rdg ± 5 dgt DC 750V
or
AC 750V rms
20V ±1.2% rdg ± 5 dgt
200V ±1.2% rdg ± 5 dgt
750V ±1.2% rdg ± 5 dgt
Resistance(Ω)
Auto ranging
200Ω ±1.2% rdg ± 5 dgt Input protection
250V rms
(within 10 second)
2kΩ ±1.2% rdg ± 5 dgt
20kΩ ±1.2% rdg ± 5 dgt
200kΩ ±1.2% rdg ± 5 dgt
2000kΩ ±1.2% rdg ± 5 dgt
20MΩ ±3.0% rdg ±10 dgt
Continuity check 200Ω Beeper <approx.50Ω 250V rms
Diode test 2V ±10% rdg ± 3dgt 250V rms

PAGE TOP