Split type AC Current Sensor
Split type AC Current Sensor
CTF-6 AC Current measurements, AC 0.1~30A, φ6mm
CTF-10 AC Current measurements, AC 0.1~60A, φ9.5mm
CTF-16 AC Current measurements, AC 0.1~100A, φ14.5mm
CTF-24 AC Current measurements, AC 0.1~200A, φ24mm
CTF-5A AC Current measurements, AC 0.01~5A, 10mm×7.9mm
CTF-50A AC Current measurements, AC 0.1~50A, 10mm×9.5mm
CTF-100A AC Current measurements, AC 0.1~100A, 16mm×14.5mm
CTF-200A AC Current measurements, AC 1~200A, 24mm×24mm
CTF-400A AC Current measurements, AC 1~400A, 37mm×35.5mm
CTF-600A AC Current measurements, AC 1~600A, 37mm×35.5mm
CTF-7NF AC Current measurements, AC 0.1~40A, φ7mm
CTF-13NF AC Current measurements, AC 0.1~100A, φ13mm
Split type AC Current Transformer
CTS-100 General metering application, AC 100A,φ35mm, 1A output
CTS-200 General metering application, AC 200A,φ35mm, 1A output
CTS-300 General metering application, AC 300A,φ35mm, 5A output
CTS-400 General metering application, AC 400A,φ35mm, 5A output
CTS-600 General metering application, AC 600A,φ35mm, 5A output
CTF-100T General metering application, AC 100A,φ24mm, 1A output
CTF-200T General metering application, AC 200A,φ35mm, 1A output
CTF-400T General metering application, AC 400A,φ35mm, 1A output
Split type Pulse Current Sensor
Current Sensor for Outdoor Use
Zero Phase Current Transformer
Through Hole type AC Current Sensor
Clamp type AC Current Sensor
Other AC Current Sensor
Split type AC Current Sensor
CTF-5A AC Current measurements, AC 0.01~5A, 10mm×7.9mm
FEATURES
Suitable for current measurements of terminal feeder.
Wire stopper is equipped for the slipping protection.
The special connector is not necessary as the output terminals are provided.
Open circuit protection and nonflammable plastic material.
SPECIFICATIONS
Rated Primary Current
AC5A(50/60Hz)
Applicable Current
0.01A~5A
Max. Capable Current
100A
Nominal CT Ratio
3000:1
CT Inside Diameter
φ7.9mm
Applicable Frequency
10Hz~5kHz
Output Example
AC16.66mV±1%(5A/10Ω)
Phase Accuracy
+1.6°±0.5°(5A/10Ω/50Hz)
+1.3°±0.5°(5A/10Ω/60Hz)
Open Protection
7.5V (Zener diode)
Capable CT Open/Close
Approx. 100 times
Output Part
M3 Terminal
Rated Voltage
Less than AC600V for low voltage circuit of coated wires
Withstanding Voltage
AC2200V/1 minute (between output terminal and outer case)
Insulation Resistance
More than 100MΩ by 500V insulation tester (between output terminal and outer case)
Operation Temperature
-20~60℃, less than 80%RH w/o condensation
Dimension
33×41.3×25.3mm
Weight
Approx. 45g
Standard
Compliant with RoHS directive