M-260 AC/DC Digital Clamp Tester (CE)55mmφCT, ACA, DCA, ACV, DCV, Hz, Ω

AC/DC Current, 40A/400A/2000A, 55mmφ CT (CE)

FEATURES

Wide current measurements with tear drop type 55mmφCT up to 2000A.
Data-hold and Auto power off function.
Additional AC/DC voltage, resistance, diode test, continuity check.
Auto zero adjustment for DC current offset.
Conform to IEC safety requirements.

INQUIRY

DOWNLOAD

Catalog：e_ca_m260.pdf
Instruction Manual ：e-ma-m260.pdf

SPECIFICATIONS
Withstanding Voltage	AC 5500V 1 minute max. (Between the core of CT and outer case)
Storage Temperature	-10℃ to 60℃, 70%RH max. ( Without condensation )
Accuracy	(23℃±5℃, 80%RH or less) Function/Range/Resolution/Accuracy/Max. input ACA(50/60Hz) DCA Manual range/40A/0.01A/±2%rdg±8 dgt/AC/DC2000A ACA(50/60Hz) DCA Manual range/400A/0.1A/±1.5%rdg±8 dgt/AC/DC2000A ACA(50/60Hz) DCA Manual range/2000A/1A/±1.5%rdg±8 dgt/AC/DC2000A ACV(50/60Hz) DC V Auto/Manual range/400mV/0.1mV/±1.2%rdg±8 dgt/AC/DC 600Vrms ACV(50/60Hz) DC V Auto/Manual range/4V/0.001V/±1.2%rdg±8 dgt/AC/DC 600Vrms ACV(50/60Hz) DC V Auto/Manual range/40V/0.01V/±1.2%rdg±8 dgt/AC/DC 600Vrms ACV(50/60Hz) DC V Auto/Manual range/400V/0.1V/±1.2%rdg±8 dgt/AC/DC 600Vrms ACV(50/60Hz) DC V Auto/Manual range/600V/1V/±1.2%rdg±8 dgt/AC/DC 600Vrms Frequency(Hz)/100Hz/0.01Hz/±0.5%rdg±3 dgt/AC/DC 600Vrms Auto range/1000Hz/0.1Hz/±0.5%rdg±3 dgt/AC/DC 600Vrms Auto range/10kHz/0.001kHz/±0.5%rdg±3 dgt/AC/DC 600Vrms Auto range/100kHz/0.01kHz/±0.5%rdg±3 dgt/AC/DC 600Vrms Auto range/1000kHz/0.1kHz/±0.5%rdg±3 dgt/AC/DC 600Vrms Resistance(Ω) Auto/Manual range/400Ω/0.1Ω/±1.5%rdg±8 dgt/250 Vrms Resistance(Ω) Auto/Manual range/4kΩ/0.001kΩ/±1.5%rdg±8 dgt/250 Vrms Resistance(Ω) Auto/Manual range/40kΩ/0.01kΩ/±1.5%rdg±8 dgt/250 Vrms Resistance(Ω) Auto/Manual range/400kΩ/0.1kΩ/±1.5%rdg±8 dgt/250 Vrms Resistance(Ω) Auto/Manual range/4000kΩ/1kΩ/±1.5%rdg±8 dgt/250 Vrms Continuity check/400Ω/0.01Ω/Approx. < 40Ω/250Vrms Diode test/3V/0.001V/±10%rdg±3 dgt/250Vrms
Operating Temperature	0℃ to 40℃, 80%RH max. ( Without condensation )
Power supply	1.5V (AM-4, LR03 or AAA)×2
Power consumption	14mW
Weight	Approx. 350g
AC Conversion	Average sensing rms reading
Safety standard	IEC 61010-1, IEC 61010-2-032 Installation CategoryⅢ600V phase to earth.
Jaw opening capability	55mmφ
Accessories	Hard carrying case:1 Instruction manual:1 Test lead:1set Batteries:2
Display	3.5 digit LCD, max. reading of 3999
Over range indication	Blanking of all digits except MSD 1
Data hold indication	"DH" mark on LCD
Low battery indication	"Battery" mark on LCD
Auto power off	Approx. 10 minutes later after power on
E.M.C. standard	EN 61326
Measuring method	Dual slope integration mode
Battery life	85(W)×240(H)×34(D)mm
Sampling	2 times/sec

INQUIRY