MCL-800D+ Digital Clamp Tester with 80mm x 74mm CT80mm x 74mm CT, ACA

AC Leakage Current, 20mA/200mA/2A/20A /200A/1000A, 80mmφ CT

FEATURES

・80mm x 74mm CT window and wide current measurements from 0.01mA to 1000A.
・With filtering switch (which cuts currents above 150Hz)
・Maximum value hold / Data hold function available
・Auto range switch that selects the optimum range according to the measured value
・Easy to read large display

INQUIRY

DOWNLOAD

Catalog：e-ca_MCL-800D+.pdf
Instruction Manual ：e-ma-MCL-800D+ series.pdf

SPECIFICATIONS
Measuring method	Dual slope integration mode
Measurement range	AC20mA/200mA/2A/20A/200A/1000A/Auto
Accuracy	23℃±5℃ 80%RH or less (50/60Hz) Range/Resolution/Accuracy AC 20mA/0.01mA/±2.0% rdg ± 5 dgt AC 200mA/0.1mA/±2.0% rdg ± 5 dgt AC 2A/1mA/±2.0% rdg ± 5 dgt AC 20A/10mA/±2.0% rdg ± 5 dgt AC 200A/0.1A/±2.0% rdg ± 5 dgt AC 1000A/1A/±2.0% rdg ± 5 dgt
Filter function	Low pass filter : 150Hz
Max Memory function	"Max" mark on LCD with maximum value
Auto power function	It power-off approximately 10-minutes after final operation. This function will be disabled during MAX-hold/ Bluetooth is on.
Over range indication	Only the manual ranges are displayed up to 110% of the setting range (Excluding 1000A range). "OL" mark on LCD
Data hold indication	"DH" mark on LCD with data hold value
Low battery indication	"Battery" icon on LCD
Sampling	2 times/sec
Jaw opening capability	80mm x 74mm
Withstanding Voltage	AC 3700V 1 minute max. (Between the core of CT and outer case)
Limitation of circuit voltage	Less than AC 600V (EN61010 Installation category CAT III 300V)
Operating Temperature	0℃ to 50℃, 85%RH max. (Without condensation )
Storage Temperature	-10℃ to 60℃, 80%RH max. (Without condensation )
Power supply	1.5V (AM-4, LR03 or AAA)×3
Size	138(W)×237(H)×46(D)mm
Weight	Approx. 650g
Accessories	Hard carrying case:1 Instruction manual:1 Batteries:3

INQUIRY