- HOME >
- マルチ製品 >
- Measuring Instruments >
- Measuring Instruments for PV System > MIS-PV1 Insulation Resistance Tester for PV (2 range)
直流電流センサ
交流電流センサ
計測器
PV System
MIS-PV1 Insulation Resistance Tester for PV (2 range)
特徴
The model MIS-PV1 is an insulation resistance tester for the exclusive use in photovoltaic systems. The ordinary insulation resistance testers cannot make measurement properly during generation of PV systems. This instrument, however, can measure the insulation resistance simply by touching probe to the live line whether making generation or not. There are two ranges of PVH and PVL. PVH is for high voltage generation system (more than 500V and less than 1000V) and PVL is for the system less than 500V.ダウンロード
- 詳細カタログ：e_ca_mis-pv1.pdf
- 取扱説明書：e_ma_mis-pv1.pdf
method of operation
| SPECIFICATIONS 1 | ||
|---|---|---|
| Rated Measuring Voltage | PVL 500V | PVH 1000V |
| Effective Max. Display | 100MΩ | 2000MΩ |
| Center Displayed Value | 2MΩ | 50MΩ |
| First Effective Range | More than 0.1 MΩ, less than 50MΩ | More than 2 MΩ, less than 1000MΩ |
| Tolerance | Less than ±5% | |
| Second Effective Range | More than 0.05MΩ, less than 0.1MΩ | More than 1MΩ, less than 2MΩ |
| More than 50MΩ, less than 100MΩ | More than 1000MΩ, less than 2000MΩ | |
| Tolerance | Less than ±10% | |
| SPECIFICATIONS 2 | |
|---|---|
| Display | 3 1/2 digit LCD, max. reading of 3200 with bar graph and annunciator |
| Display Ranges | 3.200/32.00/320.0/3200(4 range auto) |
| Minimum Resolution | 0.001 MΩ |
| Operating Temperature | 0℃~40℃, less than 80%RH (w/o condensing) |
| Power Supply | 1.5V (AA size, LR6) alkali battery x 6 pcs. |
| Dimension & Weight | 170(W)x105(D)x52(H)mm, approx. 350g (without batteries) |
| Standard Accessories | line test lead 1 pce., earth test lead 1 pce., batteries 6 pcs., test lead case 1 pce., instruction manual 1 pce. |
| OTHER FUNCTION | |
|---|---|
| Over Range Indication | ”OL” mark on LCD |
| Low Battery Indication | ” B ” mark on LCD, less than 7.8±0.2V |
| Data Hold Indication | ”DH” mark on LCD |
| Auto Power Off | automatically power off, approx. 10 minutes after power on (To release this function, put the rotary switch to off and power on again) |
| Back Light Function | By pressing back light switch (LIGHT) once, back light will appear and will become off by pressing once more. This back light will become off automatically 10 minutes after lighting on. |
| Open Circuit Discharge | cancel the stored DC electrical charge by automatic discharging function, can confirm discharge by becoming HV lamp off. |
