- HOME >
- 現場計測器 >
- Measuring instruments, Testers >
- Voltage Detector > DAP-06 Low Voltage Detector
電気計測器・試験器
LAN・通信回線測定器・ツール
フィールド測定器・ツール
温度・温湿度・熱画像・風速計
空気・ガス分析器
水質測定器・分析器
その他関連用品・ツール
Low Voltage Detectors
DAP-06 Low Voltage Detector
Application Change Method to Bare & Coated Conductor
特徴
●More certain detection can be done by changing method to bare and coated conductor.●No beeping and light emission during carry.
●Implemented low cost by full cost down.
| SPECIFICATIONS | |
|---|---|
| Applicable Voltage | AC 40～600V |
| Applicable Frequency | 50/60Hz common use |
| Indication Method | Intermittent beeping and light emission |
| Power Supply | LR44×2 |
| Dimension | W19.5×H133×D19mm |
| Weight | 17g |
| Conformity standard | Equate IEC61010 CAT-IV 600V. 1,Insulation of detection element →Equipped semi-insulating rubber detection element(carbon is mixed with insulating rubber) is used to prevent short-circuit accidents. 2,With or without finger guard → The colors are divided into gray and black so that the difference between the grip and non-grip parts can be clearly distinguished. You can safely detect electricity by grasping the gray grip 3,Ensuring the pattern insulation distance of the internal circuit → The standard is that the voltage detector can withstand the applied of 8kV impulse under it is not grounded condition, but DAP-06 can withstand the applied of AC2kV for 1min under more severe conditions with the entire grip parts covered with metal foil(grounded). 4,Battery leak protection → Batteries are stored in guards on all sides. In addition, even if the battery leaks and the battery contacts have poor continuity, sharp protrusions are provided on the contact part to prevent poor contact. |
