用 户 登 录
- HOME >
- 万用产品 >
- Measuring Instruments >
- Clamp Meter >
- M-2002 2CT Method Mini Clamp Tester
直流传感器
交流传感器
仪器仪表
AC Leakage Clamp Meter
M-2002 2CT Method Mini Clamp Tester 40mmφCT/5mmφCT, ACA
New measuring method for AC leakage current
This is new measuring method for AC leakage current for single phase power system.
It is useful when working at the field where it is difficult to clamp the whole phase conductors(L&N).
特征
Compact size and light weight for convenient field use.True rms reading with wide range from 1mA to 200A.
Extensional measurements by combination with optional auxiliary CT.
Measuring Example
There are many single phase panel (breaker) boards which is composed of the single pole breakers. In such panel board,L phase conductor is separated from N phase conductor and it is difficult to clamp whole phase conductors(L&N) by CT.
New 2CT method enabled the measurements of leakage current for such panel board as showed below.
下载
- Catalog：e_ca_m2002.pdf
- Instruction Manual ：e-ma-m2002.pdf
- Application Examples：e_ex_m2002.jpg
| SPECIFICATIONS | |
|---|---|
| Measuring function | AC leakage current(By 2CT) AC leakage current (By main CT) AC load current |
| Measuring ranges | 0 ～ 200mA/2000mA (Leakage current) 0 ～ 20mA/200A (Load current) |
| Display | LCD max. 9999 count with annunciators |
| Accuracy | (23 ℃ ±5 ℃ , less than 85%RH) Function/Range/Resolution/Accuracy(50/60Hz) 2CT/AC1000mA/0.1mA/±1% rdg ± 10dgt 2CT/AC10A/0.001A/±1% rdg ± 10dgt Main CT/AC20A/0.01A/±1% rdg ± 10dgt Main CT/AC200A/0.1A/0 ～ 100A:±1% rdg ± 10dgt,101 ～ 150A : ± 3% rdg ± 10dgt,151 ～ 200A : ± 6% rdg ± 10dgt |
| AC conversion | True rms responding |
| A/D conversion | Dual slope integration method |
| Jaw opening capability | 40mm φ (Main CT) 5mm φ (Auxiliary CT) |
| Over range indication | Over range indication |
| Data hold indication | "DH" mark on LCD |
| Auto power off | Approx. 10 minutes after power on |
| Low battery indication | "B" mark on LCD |
| Sampling rate | 2 time/sec. |
| Limitation of circuit voltage | Less than AC/DC 500V |
| Withstanding voltage | AC 2000V/1 minute between CT and outer case |
| Operating temperature | 0 ～ 40 ℃ , < 85%RH (without condensation) |
| Storage temperature | -10 ～ 60 ℃ < 70%RH (without condensation) |
| Power supply | LR03,AM-4 or AAA size Alkaline battery×3 |
| Size | 64(W)×195(H)×24(D)mm(Main CT) 25(W)×114(H)×19(D)mm(Auxiliary CT) |
| Weight | Approx.190g |
| Accessories | Carrying case:1 Instruction manual:1 Batteries:3 Auxiliary CT (CTP-05-2) with 1.5m lead cable:1 |
