ZCT-18S Clamp type AC current sensor/For low leakage current (ZCT Series) [AC Current sensor

	search WWW search Multi Site

Clamp type AC current sensor/For low leakage current measurements (ZCT Series)

ZCT-22
(Leakage current measurements and power monitor, AC 1mA～100A, φ22mm)
ALCL-40D
(For μA measurements with super noise proof, AC 1μA～50A, φ37mm)
ZCT-110
(Current measurements of less than AC 1mA with noise proof, AC 0.01mA～20A, φ30mm)
ZCT-110S
(Current measurements of less than AC 1mA with noise proof, AC 0.01mA～20A, φ30mm)
ZCT-340
(Current measurements of less than AC 1mA with noise proof, AC 0.01mA～20A, φ40mm)
ZCT-340S
(Current measurements of less than AC 1mA with noise proof, AC 0.01mA～20A, φ40mm)
ZCT-18
(Current measurements of less than AC 1mA with noise proof, AC 0.01mA～20A, φ18mm)
ZCT-18S
(Current measurements of less than AC 1mA with noise proof, AC 0.01mA～20A, φ18mm)
ZCT-80H
(Zero phase current measurements with noise proof, AC 0～10A, φ80mm)

PRODUCTS

FEATURES

■ CHARACTERISTIC OF OUTPUT VOLTAGE

SPEC
SPECIFICATIONS
Measuring Range	:	AC 0.01mA～20A
CT Inside Size	:	φ18mm
Output Characteristic	:	Refer to the drawing
Nominal CT Ratio	:	2200:1
Recommendable Load resistance	:	1～200Ω
Applicable Frequency	:	10～500Hz
MAX. Circuit Voltage	:	Less than AC 600V for insulated cable
Withstanding Voltage	:	AC 2200V,1 minute (between CT and output)
Insulation Resistance	:	DC500V, more than 100MΩ (between CT and output)
Operating Temperature	:	0～60℃ less than 80%RH Without condensation
Output cable	:	φ3mm,1wire shield cable(20cm)
Dimension	:	45×98×20mm
Weight	:	65gs