PRODUCTS

AC Current, 20A/200A/2000A, 55mmφ CT Model 2100 (CE)
FEATURES Wide current measurements with tear drop type 55mmφCT up to 2000A. Data-hold and Auto power off function. Additional AC/DC voltage, resistance, diode test, continuity check. Conform to IEC safety requirements.
≫ Show detail ≫ Catalog PDF

DETAIL

SPEC SPECIFICATIONS Safety standard : IEC 61010-1, IEC 61010-2-032 Installation CategoryⅡ600V or CategoryⅢ300V. E.M.C. standard : EN 61326 Measuring method : Dual slope integration mode Display : 3.5 digit LCD, max. reading of 1999 Jaw opening capability : 55mmφ Over range indication : Blanking of all digits except MSD 1 Low battery indication : "Battery" mark on LCD Data hold indication : "DH" mark on LCD Sampling : 2 times/sec Withstanding voltage : AC 3700V 1 minute max. (Between the core of CT and outer case) Operating temperature : 0℃ to 40℃, 80%RH max. ( Without condensation ) Storage temperature : -10℃ to 60℃, 70%RH max. ( Without condensation ) Power supply : 1.5V (AM-4, LR03 or AAA)×2 Power consumption : 3.5mW Auto power off : Approx. 10 minutes later after power on Battery life : Approx. 500 hours continuous Size : 85(W)×240(H)×34(D)mm Weight : Approx. 350g Accessories : Hard carrying case : 1 Instruction manual : 1 Test lead : 1set Batteries : 2 Accuracy : (23℃±5℃, 80%RH or less) Function Range Accuracy Maximum input AC A (50/60Hz) Manual ranging 20A ±1.2% rdg ±10 dgt AC2000A (30 second) 200A ±1.2% rdg ±10dgt 2000A ±1.2% rdg ± 8 dgt AC V (50/60Hz) DC V Auto ranging 2V ±0.7% rdg ± 5 dgt DC 600V or AC 600V rms 20V ±1.2% rdg ± 5 dgt 200V ±1.2% rdg ± 5 dgt 600V ±1.2% rdg ± 5 dgt Resistance(Ω) Auto ranging 200Ω ±1.2% rdg ± 5 dgt Input protection 250V rms (30 second) 2kΩ ±1.2% rdg ± 5 dgt 20kΩ ±1.2% rdg ± 5 dgt 200kΩ ±1.2% rdg ± 5 dgt 2000kΩ ±1.2% rdg ± 5 dgt 20MΩ ±3.0% rdg ±10 dgt Continuity check 2kΩ Beeper < Approx. 300Ω 250V rms Diode test 2V ±10% rdg ± 3dgt 250V rms