用 户 登 录
- HOME >
- 万用产品 >
- Measuring Instruments >
- Clamp Meter >
- M-2010 Digital Clamp Tester (CE)
直流传感器
交流传感器
仪器仪表
AC Clamp Meter
M-2010 Digital Clamp Tester (CE)40mmφCT, ACA, ACV, DCV, Ω
AC Current, 20A/200A/600A, 40mmφ CT (CE)
特征
Data-hold and Auto power off function.Conform to IEC safety requirements.
Additional AC/DC voltage, resistance, diode test, continuity check.
下载
- Catalog：e_ca_m2010.pdf
- Instruction Manual ：e-ma-m-2010.pdf
| SPECIFICATIONS | |
|---|---|
| Withstanding Voltage | AC 5500V 1 minute max. (Between the core of CT and outer case) |
| Storage Temperature | -10℃ to 60℃, 70%RH max. ( Without condensation ) |
| Accuracy | (23℃±5℃, 80%RH or less) Function/Range/Accuracy/Maximum input AC A (50/60Hz) Manual ranging/20A/±1.2% rdg ±10 dgt/AC600A AC A (50/60Hz) Manual ranging/200A/±1.2% rdg ±10dgt/AC600A AC A (50/60Hz) Manual ranging/600A/±1.0% rdg ± 8 dgt/AC600A AC V (50/60Hz) DC V Auto ranging/2V/±0.7% rdg ± 5 dgt/DC 600V or AC 600V rms AC V (50/60Hz) DC V Auto ranging/20V/±1.2% rdg ± 5 dgt/DC 600V or AC 600V rms AC V (50/60Hz) DC V Auto ranging/200V/±1.2% rdg ± 5 dgt/DC 600V or AC 600V rms AC V (50/60Hz) DC V Auto ranging/600V/±1.2% rdg ± 5 dgt/DC 600V or AC 600V rms Resistance(Ω) Auto ranging/200Ω/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second) Resistance(Ω) Auto ranging/2kΩ/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second) Resistance(Ω) Auto ranging/20kΩ/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second) Resistance(Ω) Auto ranging/200kΩ/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second) Resistance(Ω) Auto ranging/2000kΩ/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second) Resistance(Ω) Auto ranging/20MΩ/±3.0% rdg ±10 dgt/Input protection 250V rms (30 second) Continuity check/2kΩ/Beeper < Approx. 300Ω/250V rms Diode test/2V/±10% rdg ± 3dgt/250V rms |
| Operating Temperature | 0℃ to 40℃, 80%RH max. ( Without condensation ) |
| Power supply | 1.5V (AM-4, LR03 or AAA)×2 |
| Power consumption | 3.5mW |
| Weight | Approx. 425g |
| Safety standard | IEC 61010-1, IEC 61010-2-032 Installation CategoryⅢ600V phase to earth |
| Jaw opening capability | 40mmφ |
| Size | 70(W)×223(H)×34(D)mm |
| Accessories | Hard carrying case：1 Instruction manual：1 Test lead：1set Batteries：2 |
| Display | 3.5 digit LCD, max. reading of 1999 |
| Over range indication | Blanking of all digits except MSD 1 |
| Data hold indication | "DH" mark on LCD |
| Low battery indication | "Battery" mark on LCD |
| Auto power off | Approx. 10 minutes later after power on |
| E.M.C. standard | EN 61326 |
| Measuring method | Dual slope integration mode |
| Battery life | Approx. 500 hours continuous |
| Sampling | 2 times/sec |
